Filter
Top Products
En
17
Types of effects
1/1 repeat1/2 repeat
Origina
l
Roll
Changed from 1/2
to 1/1
Effect turned on
BEAT c, d buttons
(parameter 1)
Sets effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and ROLL.
X-PAD (parameter 4) Use this to set the effect time.
ROLL
The sound being input at the point when the [ON/OFF] is pressed is
recorded, and the recorded sound is output repeatedly according to the
beat fraction set with the [BEAT c, d] buttons.
Effect turned on
Repeated
Original
1/1 roll
BEAT c, d buttons
(parameter 1)
Sets effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and ROLL.
X-PAD (parameter 4) Use this to set the effect time.
VINYL BRAKE
The playback speed of the input sound changes according to the beat
fraction set with the [BEATc, d] buttons, slowing steadily, until play-
back stops.
BEAT c, d buttons
(parameter 1)
Sets effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Sets the playback speed of the input sound. Turn fully
left to return steadily to the original sound. Turn right
from the fully left position to slow playback steadily,
resulting in an effect that stops playback.
X-PAD (parameter 4) Use this to set the effect time.
HELIX
The sound being input at the point when the [ON/OFF] is pressed is
recorded, and the recorded sound is output repeatedly according to the
beat fraction set with the [BEAT c, d] buttons.
Turn the [LEVEL/DEPTH] control right from the fully left position to
record the input sound. Also, turning it fully right fixes the output sound.
Altering the effect time changes the pitch of the sound recorded up to
that point.
BEAT c, d buttons
(parameter 1)
Sets effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Set the ratio of sound overlay. Turn fully left to return
to the original sound. Turn right from the fully left
position to records input sound from its default state.
X-PAD (parameter 4)
Set effect time to alter pitch. Remove your finger from
X-PAD to automatically return to the set effect time.
1
When [1] to [4] is selected with the effect channel selector switch,
the effect sound cannot be monitored even if the [CUE] button of the
selected channel is pressed.