Filter
Top Products
En
10
Connecting output terminals
L
R
L
R
Power amplifier
2
Power amplifier
2
Analog input
recording device
Power amplifier
(for booth monitor)
External effector
1
Digital audio
input device
3
1 Also connect the external effector to the [RETURN] terminal (input terminal).
2 Be sure to use the [MASTER1] terminals only for a balanced output. Connection with an unbalanced input (such as RCA) using an XLR to RCA
converter cable (or converter adapter), etc., may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the [MASTER2] terminals.
3 Be careful not to accidentally insert the power cord of another unit to [MASTER1] terminal.
Connecting to the control panel
MAX
ON/OFF
MIN
A
B
CROSS FADER ASSIGN
0
PHONES
LEVEL
ON/OFF
TRIM
LEVEL
0
USB
MIDI
ON/OFF
CLIP
DECK 3/C
TRIM
CLIP
DECK 1/A
TRIM
CLIP
DECK 2/B
TRIM
CLIP CLIP
DECK 4/D
AB
DIGITAL
LINE
PHONO
AB
RETURN
AUX
DIGITAL
LINE
PHONO
AB
RETURN
AUX
DIGITAL
LINE
PHONO
AB
RETURN
AUX
DIGITAL
LINE
PHONO
AB
RETURN
AUX
SEND / RETURN
MASTER
Connect using USB cables.
USB hubs cannot be used.
USB port covers
1
USB port covers
1
Computer Mobile device
2
Headphones
USB hubs cannot be used.
1 Do not push or pull hard on a USB port cover. It could be damaged.
2 When connecting a mobile device, use the cable supplied with the device.
For information on compatible mobile devices, see the Pioneer DJ site below.
http://pioneerdj.com/support/