Leica VT100 A Bouncy Seat User Manual


  Open as PDF
of 49
 
29
Leica VT1000 A
5. Operation
Fig. 42
5.2.2 Adjusting the specimen and blade
Positioning the specimen in the specimen
holder
You can adjust the lateral position of the speci-
men in order to attain an approximate centering
of the specimen in the specimen tray. Since one
of the jaws of the specimen holder is stationary,
the use of specimen mounting blocks of vary-
ing widths will allow for adjustable specimen
mounting.
Adjust the tilt of the specimen holder.
You can adjust the tilt of the specimen holder in
one axis in order to make the specimen surface
approximately horizontal.
• Todoso,firstunscrewthelockingscrew
with a plastic head between the front side of
the holder and the wall of the specimen tray.
• Youcannowtilttheentirespecimenholder
to one side.
Fig. 43
 previous next