Leica VT100 A Bouncy Seat User Manual


  Open as PDF
of 49
 
20
Operating Manual V 1.1 – 01/2010
4. Setup the Instrument
4.7.1 Inserting the round specimen tray
The round specimen tray (45) can be installed
in place of the specimen block. It enables easy
separation of buffer solution and ice that can
accumulate in the main specimen bath.
Always remove the blade BEFORE in-
stalling or removing accessories!
To insert it, follow these steps:
• First,inserttheV-blockadapter(46) into the
tensioning clamp (46) as shown in Fig. 20.
• Positionthelowerpostatthebottomofthe
round specimen tray into the V-block adapt-
er (46) so that it can be clamped into place
using the knurled screw (37) (Fig. 21).
• Holdthespecimentrayhorizontallyand
clamp it into place using the knurled screw
(Fig. 22).
Fig. 22
Fig. 20
46
34
Fig. 21
46
45
46
45
Fig. 19
46
39
 previous next