Leica VT100 A Bouncy Seat User Manual


  Open as PDF
of 49
 
13
Leica VT1000 A
4. Setup the Instrument
Fig. 6
4.3 Unpacking and setting up the instrument
• Firstchecktheshipmentforexternaldamagesuponarrival.
• Ifitisevidentthattheshipmentwasdamagedduringtransport,pleasemakeaclaimtothe
carrier immediately.
• Ensurethattheinstrumentisstandingonaworksurfacethatisasfreeofvibrationsaspossible.
The instrument must be set up the instrument so that the left rear side of the instrument (item
15 in Fig. 7) is easily accessible at any time.
1. Remove the lid (1) of the transport crate by
unscrewing the 4 Phillips head screws (2).
2. Take out the accessory box (3) and remove
the white packing material (5).
3. Remove the other accessory cartons.
4. To lift the instrument from the box, hold it on
the left and right of the housing (Fig. 6), lift it
out of the foam cushion of the package and
place it on a stable lab table.
Never lift the instrument by holding
it by its blade holder (6), the setting
wheel (7) for the section thickness or
adjustment knobs (8) for section cutting
window.
6
8
7
Fig. 4
Fig. 5
2
3
5
1
 previous next