Filter
Top Products
77
NS-55D420NA16 Insignia 55" 1080p 60Hz LED TV
www.insigniaproducts.com
My TV’s remote
control does
not control the
device.
• Make sure that there are no
obstructions between the
remote control and the remote
control sensors on your TV and
the device.
• Depending on the device, all
the buttons may not work.
• Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 43.
• If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the TV
Speakers option on the Audio
menu is set to On. See
“Adjusting sound settings” on
page 52.
• If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the
Audio Receiver option on the
Inlink menu is set to On. See
“Turning Audio Receiver on or
off” on page 45.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
The device does
not show up in
the INlink
Device list.
• Make sure that the device is
turned on.
• Make sure that the HDMI cable
is connected securely to your
TV and the device.
• Make sure that the device is
connected to your TV with an
HDMI cable.
• Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 43.
• Make sure that the device is a
CEC device. See the
documentation that came with
the device.
My device does
not turn off
when I turn off
my TV.
• Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 43.
•Make sure that Device Auto
Power Off is set to On on the
Inlink menu. See “Turning
Device Auto Power Off on or
off” on page 44.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
Problem Solution
My TV does not
turn on when I
turn on my
device.
• Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 43.
•Make sure that TV Auto Power
On is set to On on the Inlink
menu. See “Turning TV Auto
Power On on or off” on page 44.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
The Audio
Receiver
setting on the
Inlink menu
keeps turning
back on after it
is turned off.
• When Audio Receiver is set to
Off and INlink Control is set to
On and you make an
adjustment to the audio
receiver (for example, turn the
volume knob or press a button),
Audio Receiver is
automatically set to On. To
prevent this from happening,
turn off the INlink feature. See
“Turning INlink on or off” on
page 43.
Problem Solution