Filter
Top Products
Installation 47
IMPORTANT: If the mezzanine card is not installed properly or the interconnect module
installation does not coincide with the mezzanine card installation, the ports on the interconnect
module will not function.
NOTE: For more information on how and where to install mezzanine cards, see the
server-specific user guide.
To install an interconnect module:
1. Remove the interconnect blank, if applicable.
2. If you are installing a double-wide interconnect module, remove the interconnect bay dividers
("Removing interconnect bay dividers" on page 55).
3. Install the interconnect module, and close the release lever.