Filter
Top Products
2-29
Cisco NetFlow Collector User Guide
OL-11399-01
Chapter 2 Using the NetFlow Collector User Interface
Configuration
Click on the appropriate link to add or remove a source device or group. Note that groups are obtained
from the NetFlow Export Source Groups page. See the “Creating Access Lists” section on page 4-24 for
additional information about configuring source access lists.
Figure 2-18 NDE Source Access List
BGP Peer
Click the BGP Peer folder of the NFC UI navigation tree to display the configuration for the Cisco
NetFlow Collector BGP peer, as shown in Figure 2-19. Click on Add Remote Peer tospecify anew BGP
peer. If the BGP Identifier field is left blank, the BGP identifier of the Cisco NetFlow Collector BGP
peer defaults to the integer value of this host's IP address.
Note The BGP Peer must be stopped and restarted for configuration updates to take effect. See the “BGP Peer”
section on page 5-8 for additional information about BGP Peer configuration.