Filter
Top Products
2-24
Cisco NetFlow Collector User Guide
OL-11399-01
Chapter 2 Using the NetFlow Collector User Interface
Configuration
Max Flow Byte Rate
The Max Flow Byte Rate value builder determines the byte rate for each received flow and outputs the
highest value found for all flows in an aggregation period. This builder was referred to as Max Burst Rate
in previous releases. It has the following attributes.
Rate
The Rate value builder determines a rate by dividing the result of another value by the amount of time
in the aggregation period. It has the following attributes.
Start Time
The Start Time value builder obtains a start time from a field in a flow. It has the following attributes...
Sum
The Sum value builder obtains an integer value from a field in a flow and adds it to a count. It has the
following attributes.
Attribute Description
Name Column name in output.
Start time field ID of the start time field to obtain from a flow.
End time field ID of the end time field to obtain from a flow.
Byte count field ID of the byte count field to obtain from a flow.
Usage Always leave set as Maximum.
Attribute Description
Name Column name in output.
Quantity value ID of another value builder used to determine the
quantity.
Units Scales the result to seconds or minutes.
Attribute Description
Name Column name in output.
Start time field ID of the start time field to obtain from a flow.
Attribute Description
Name Column name in output.
Field ID of the integer field to obtain from a flow.
Allow null value If not selected and the flow does not contain the
specified field, an error is logged.