Filter
Top Products
2-22
Cisco NetFlow Collector User Guide
OL-11399-01
Chapter 2 Using the NetFlow Collector User Interface
Configuration
Figure 2-11 Value Builders
Click on Add Value Builder to bring up an empty form for defining a new value builder. A value builder
is created by specifying its type, associating it with a field (sometimes two or more fields such as for the
Active Time type as shown in Figure 2-12), and specifying attributes specific to the selected type.
Different forms are displayed depending on which value builder type is selected.
When Add Value Builder or Edit is selected, a form for editing the value builder definition is displayed.
All value builders have an ID and Type. The ID must be unique for all value builders; the Type
determines the algorithm used to create the value. The remaining attributes that are shown in the Value
Builder form are determined by which type is selected.
Figure 2-12 Adding a Value Builder
See the “Keys and Values” section on page 4-5 for additional information about value builder definitions.