Filter
Top Products
En
35
Additional information
Problem Check Remedy
The scale is not displayed. Is the track over 15 minutes long? The scale is not displayed for tracks whose playing time is over 15 minutes.
(page 14 )
PRO DJ LINK does not work well. Are the player numbers properly set? Set [PLAYER No.] to [AUTO] or to a number different from the number currently
set. (page 29 )
Is the LAN cable properly connected? Connect the LAN cable properly to the [LINK] terminal.
Is the switching hub’s power turned on? Turn the switching hub’s power on.
Is an unnecessary device connected to the switch-
ing hub?
Disconnect the unnecessary device from the switching hub.
There is no response when you touch
the screen, or the response is bad. A
position different from the actually
touched location responds.
Calibration adjustment of touch display is
deviating.
Adjust the touch display by using the [TOUCH DISPLAY CALIBRATION] settings
in the [UTILITY] screen.
When the power is OFF, users can view the [TOUCH DISPLAY CALIBRATION]
settings screen by switching the power ON while keeping the
[OUT(OUT ADJUST)] button pressed.
About the liquid crystal display
! Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a
malfunction.
! When using in cold places, the liquid crystal display may be dark for a while after this unit’s power is turned on. It will reach the normal brightness
after a while.
! When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight.
Error messages
When this unit cannot operate normally, an error code appears on the display. Check the table below and take the measures indicated. If an error code
not shown on the table below is displayed, or if the same error code is displayed again after taking the indicated action, contact your store of purchase
or a nearby Pioneer service station.
Error code Error type Description of error Cause and action
E-8302
CANNOT PLAY TRACK(****)
Track data (files) in the USB cannot be read
correctly.
The track data (file) may be corrupt. dCheck whether the track (file)
can be played on another player, etc., capable of playing the same
formats as this unit.
E-8304
E-8305
UNSUPPORTED FILE FORMAT
Music files that cannot be played normally
are loaded.
Format is wrong.dReplace with music files in the proper format.
Cleaning the touch display
Do not use organic solvents, acids or alkalis for cleaning the surface of the touch display. Wipe with a dry soft cloth or a cloth immersed in neutral
detergent and squeezed properly.
List of icons displayed on the main unit display section
Genre Player number (1 – 4) Computer Close folder WAIT
Artist Edit the rating Year Remixer rekordbox
Album Registered in tag list Label Original artist Mixer
Track/file name Tempo (BPM) Key Search Hot cue
Playlist
HISTORY
Hot Cue Bank List
Color Bit rate DJ play count
Rating USB Playing Date library added
Time SD Open folder Comment
About iPod/iPhone
! This product has been developed and tested based on the iPod/iPhone software versions indicated on the Pioneer support DJ site. (http://pioneerdj.
com/support/)
! Compatibility with this product may be lost if a version other than the one indicated on the Pioneer support DJ site is installed on your iPod/iPhone.
! Note that Pioneer does not offer any guarantee regarding the operation of iPod/iPhone.
! Pioneer will accept no responsibility whatsoever for any loss of data on iPod/iPhone during use.
! With iPod/iPhone, material that is not copyrighted or the material for which duplication and playback is legally permitted may be duplicated and
played by individuals on a private basis. Infringement of copyrights is prohibited by law.