Filter
Top Products
Problem Possible cause Solution
Interference or Mobile or cordless phones too Move phones away from the units.
poor reception close to the baby monitor.
Pick-up from Both systems are operating on Switch channels.
another baby the same frequency.
monitor
Baby Unit cannot Telephone line not present Check telephone line connection,
switch to Dial-up ( icon on display is on). ( must be off).
mode
Baby Unit does Dial-up mode not selected Use the MODEbutton (10) to select
not dial a ( icon on display is not on). Dial-up mode.
telephone
number Telephone line not present Check telephone line connection,
( icon on display is on). ( must be off).
‘Sensitivity time’ too long. Set shorter ‘sensitivity time’.
No ‘call-up’ phone number(s) Store at least one ‘call-up’ phone
stored in the memory. number. See ‘Installing the Baby Unit
for use in ‘Dial-up mode’.
No ‘call-up’ phone number Select ‘call-up’ phone number. See
selected. Setting the Baby Unit to Dial-up mode.
Baby Unit does Wrong PIN code entered. Redial and enter correct PIN code.
not recognise
PIN code Your telephone is in pulse dial Set telephone to tone dial mode. See
mode. the instructions for use of your
telephone. Use a tone dial telephone
or a mobile telephone.
The telephone used is a pulse Use a tone dial telephone or a mobile
dial telephone. telephone.
No PIN code stored in the Store PIN code. See ‘Installing the
memory. Baby Unit for use in Dial-up mode’.
Baby Unit does The telephone used is a pulse Use a tone dial telephone.
not answer an dial telephone.
incoming call
Baby Unit Your telephone network does not Set TONE/PULSE selector (15) to
does not dial recognise dialling pulses. Tone or use a mobile telephone.
correct number
ENGLISH 17