Filter
Top Products
ENGLISH 15
Notes:
–With the C(lear) button on the keypad (5) you can always clear the last
entered digit.
– If you wish to change the PIN code, just repeat the above procedure.
Setting the sensitivity time
When the Baby Unit detects sound for approximately 10 seconds, it will
dial the selected number. In case you want to delay calling out interval
you can enter another ‘sensitivity time’.
1 Press the PRG (Program) button on the keypad (5).
2 Press the button on the keypad (5).
>’ ’and ‘10’ start flashing on the display.
3 Use the numeric keypad (5) to enter the required sensitivity time time
and confirm by pressing the OK button on the keypad (5).
Notes:
–With the C(lear) button on the keypad (5) you can clear the last entered
digit.
– Entering a time under 10 seconds or over 360 seconds will not be
accepted.
Resetting the Baby Unit
Resetting the Baby Unit is an easy way to delete all programmed phone
numbers, the PIN code and the sensitivity time simultaneously. Resetting
will also restart the quick start installation process.
• Keep the RESET button (13) pressed for about 5 seconds.
> First you will hear a short confirmation beep.
> When you hear a double beep, the reset procedure is complete.
All user settings (including selected language) are now reset to the
default factory settings.