Avoiding interference
• If there is interference or if sound reception is poor, switch both units to
another channel.
• Always ensure that the CHANNEL selection switches (2 and 30) on both
units are set to the same position.
Monitoring baby silently
• Adjust the volume on the Parent Unit to the lowest level using the
VOLUME ON/OFF control (29) (do not switch off).
>Now you will not hear your baby.Therefore you should continuously
check the sound level lights (26).The sound level lights will visually alert
you to baby’s sounds.The more noise your baby makes, the more lights
light up.
Checking that the units are in contact
• Check that the digital SYSTEM CHECK light (24) on the Parent Unit
lights up continuously (green) to confirm that the connection between
both units is reliable.
• If the light flashes (green), move the Parent Unit closer to the Baby Unit.
> The light flashes if the units are out of range for more than 30 seconds
or if there is interference.
Switching on the system check alarm
The system check alarm on the Parent Unit beeps when the units are not
in contact.The Parent Unit is delivered with the system check alarm in
the Off ( ) position.To switch on the alarm:
1 Open the Parent Unit’s battery compartment cover (32).
2 Set the SYSTEM CHECK ALARM switch (31) inside the compartment to
the ON position ( ).
3 Close the battery compartment cover (32).
> The SYSTEM CHECK light (24) can still flash even if the system check
alarm is switched off.
Switching on the night light
• Press the button (4) to switch on the nightlight.
• Switch off the night light when operating the Baby Unit on batteries to
conserve power.
Operating range 200m in open air
The baby monitor has an operating range of up to 200 metres in ideal
open-air conditions.This means that the units will be in each other’s
range when there are no obstacles in between.Walls, ceilings, large
objects and even glass affect the operating range.The more obstacles
there are in between, the shorter the operating range.
ENGLISH 11
A
B
C
D
C
H
A
N
N
E
L