Mitsubishi Electronics AJ65BT-D75P2-S3 Model Vehicle User Manual


 
11 - 11 11 - 11
MELSOFT
11. POSITIONING DEBUGGING
11.1.5 Operation monitor (dialog)
PURPOS
E
Monitor the settings, states and others of the axis control data, speed/position
control, original point return, JOG operation, and manual pulse generator operation
during operation monitor.
With operation monitor, you can check the detailed states of operation and the
settings made to the AD75 with the sequence program or peripheral device.
For each monitor item, refer to the AD75 User's Manual.
BASIC OPERATIO
N
1. Perform the basic operation in Section 11.1.2 to display the operation monitor
main screen.
2. Click the "Operation" button on the operation monitor main screen.
3. Click the <<Axis data>>/<<V/P control>>/<<OPR monitor>>/<<JOG/MPG
monitor>> tab in the Operation Monitor dialog box.
4. To exit, click the "Close" button.
DISPLAY/SETTING SCREEN
[Axis data monitor]
(Screen example: Screen displayed when AD75M# is selected in Change AD75 model)