Filter
Top Products
W6-LI System Board Manual
5
Introduction
Thank you for choosing the W6-LI system board. The
W6-LI is the highest performing advanced dual processor
solution for the industry's most demanding workstation
and server applications.
Based on the Intel 440FX PCIset, the W6-LI supports the
most advanced processor architecture, the Pentium Pro
,
which provides the speed and performance necessary to
address the most intensive computational applications.
Integrated Ultra Wide SCSI (up to 40MBytes/sec trans-
fer rate), PCI and ISA slots, up to 512K of Level 2 cache
on each CPU and support of Universal Serial Bus (USB),
make this board powerful and feature rich.
The USB interface has a maximum bandwidth of 12Mbps
and can connect as many as 127 devices to a host system.
USB supports both standard devices that operate at the
full 12Mbps rate and low-end devices that use only a
1.5Mbps subchannel.
Designed to fit into the most modern ATX form factor,
the flexible W6-LI also features support for Fast Page
Mode (FPM) and Extended Data Out (EDO) DRAM
advanced memory, and Error Checking and Correction
(ECC). The ATX form factor allows critical components
such as floppy drive connectors, chassis fan, CPU and
memory to be strategically located so that full length
cards can be used in all slots.
Micronics builds all products to exacting standards, using
the highest quality components available. We are proud
to provide this system board and believe you will be
pleased with your purchase.
Introduction