Filter
Top Products
W6-LI System Board Manual
10
9. Set the time and date. Adjust the BIOS settings to
match your configuration. If installing an IDE drive,
select the IDE device you wish to configure. Press
ENTER with Autotype Fixed Disk selected and the
BIOS will automatically configure the drive for you
(refer to Chapter 4).
10. After you have configured the Main Setup menu,
make any desired setting configurations in the Ad-
vanced and Security menu. When finished, go to the
exit screen, select “Save Changes and Exit” and you
are finished with the BIOS configuration (see Chap-
ter 4).
11. Install your IDE CD-ROM drive and its device
drivers (optional). Refer to Chapter 3.
12. Install the sound controller device drivers (optional).
Refer to Chapter 5.
13. Install the SCSI device drivers (optional). Refer to
Chapter 5.
Chapter 1: Quick Installation
Figure 1-1: Power-Up Screen