Filter
Top Products
W6-LI System Board Manual
Chapter 4: The BIOS Setup Utility
47
Standby Timeout
The Standby Timeout selection sets the amount of time
that elapses for the system to enter Standby Mode. Standby
Mode turns off various devices in the system, including the
display screen, until you start using the system again. The
options are Off (default), 1 min., 2 min., 4 min., 6 min., 80
min., 12 min. or 16 min.
Auto Suspend Timeout
The Standby Timeout selection sets the amount of time
that elapses for the system to enter Suspend Mode. The
options are Off (default), 5 min., 10 min., 15 min., 20 min.,
30 min., 40 min. or 60 min. Before making changes, "Cus-
tomized" must be selected in the Power Management
Mode selection.