Filter
Top Products
MG-3D/M MULTIPURPOSE GRID AND ACCESSORIES
PN: 05.132.036.01 B2
Page 25 of 32
Meyer Sound Laboratories Inc.
www.meyersound.com
T: +1 510 486.1166
F: +1 510 486.8356
MTB-2D/M TRANSITION BAR KIT: MILO TO M2D
The combination of the MTB-2D/M transition bar kit and MG-2D multipurpose grid allows you to easily transition from
MILO to M2D loudspeakers. MTB-2D/M transition bars provide the link needed to attach an MG-2D grid below a MILO
loudspeaker; a downfill array of M2Ds can then be flown from the MG-2D as required using the full capabilities and
flexibility of the MG-2D grid. The MTB-2D/M kit contains the bars and quick release pins (QRPs) necessary for the
transition between MILO and the MG-2D grid.
For more information on the MG-2D grid, please consult Meyer Sound’s “MG-2D Assembly Guide.”
CAUTION: When using combined arrays, the total weight of the array should always be calculated and
be within specifications before flying the array. Do not exceed the MG-3D/M grid load ratings listed in
Chapters 2 and 3 of this guide.
List of Contents: MTB-2D/M Transition Kit (Part 40.132.033.01)
Qty Part Number Description
A
2 MTB-2D/M Transition Bar
B
4 134.007 1/2" x 2.5" QRP
A
B
NOTE: The approxi-
mate combined weight
of the MTB-2D/M and the MG-
2D grid is 242 lbs (109.77 kg)
The M2D loudspeaker weighs
114 lbs (52.62 kg).