Filter
Top Products
MG-3D/M MULTIPURPOSE GRID AND ACCESSORIES
PN: 05.132.036.01 B2
Page 24 of 32
Meyer Sound Laboratories Inc.
www.meyersound.com
T: +1 510 486.1166
F: +1 510 486.8356
The MTR-3D/M transition rail kit can be reversed and used in flown or ground-supported configurations where an
M3D/M3D-Sub is underneath a MILO loudspeaker. In this configuration the MATB-3D adjustable transition bar al-
lows the transition rails to be tilted at 0°, 6° to 12° with respect to the M3D/M3D-Sub(s) below. The MRAL-MILO rear
AlignaLinks also allows MILO to be tilted from 0° to 5° in relation to the transition rails, giving a combined range from
0° to 17° between the M3D/M3D-Sub and MILO cabinets.
CAUTION: When ground
supporting an M3D/M3D-
Sub array on an MG-3D/M grid,
always keep the center of gravity
within the footprint of the leveling
feet. To further secure larger arrays
— particularly in outdoor situations
— use tie down straps or extra
weight on the grid.
CAUTION: Always use two
1/2" M3D QRPs to secure the
MATB-3D adjustable transition bar
to the MTR-3D/M transition rail. Do
not use the MILO 3/8" QRPs.