Filter
Top Products
SECTION 7—POWER ELEVATING LEGRESTS
Adjustable ASBA Seat 34 Part No 1143238
SECTION 7—POWER ELEVATING
LEGRESTS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustments or service, ALWAYS turn the
wheelchair power off, otherwise injury or damage may result.
Installing/Removing the Power Elevating Legrests
ƽ WARNING
To prevent personal injury, ALWAYS verify proper positioning of legs and feet prior
to use. Individual user weight may impact the rate of travel for each legrest
assembly. If simultaneous operation is desired, select a speed which allows for the
most uniform travel.
DO NOT insert fingers between legrest components, otherwise personal injury may
occur.
ࣼ CAUTION
NEVER allow items to become trapped between the legrest assemblies, otherwise
damage to the power legrests may occur.
Ensure that all parts of both power legrests are clear of any obstructions before
raising and lowering. Otherwise damage to the power legrests may occur.
NOTE:Forthisprocedure,refertoFIGURE 7.1onpage 35.
Installing the Power Elevating Legrests
1. Turnpowerlegresttoside(openfootplateisperpendiculartowheelchair)andalign
themountingpinonthelegrestwithmountingholeinthehangerassembly
(Detail “A”).
2. Insertthemountingpinofpowerlegrestintothemountingholeofthehanger
assembly(Detail “A”).
NOTE:Makesurethelegrestsitsflushonthehangerassembly.
3. Rotatethepowerlegstowardtheinsideofthewheelchairuntilitlocksinplace.
NOTE:Thefootplatewillbeontheinsideofthewheelchairwhenlockedinplace.
4. RepeatSTEPS1‐3fortheoppositelegrest.
5. Connectpowerlegrestconnectortotheharness(Detail “B”).