Support User Manuals

Invacare Adjustable ASBA Seat Car Seat User Manual

Open as PDF

of 76

SECTION 12—JUNIOR SEATS

Adjustable ASBA Seat 72 Part No 1143238

Adjusting the Seat Width

NOTE:Forthisprocedure,refertoFIGURE 12.3onpage 73.

NOTE:For12or13‐inchwidths,theseatpanmustbepositionedbetweenthebackcanebrackets

andtheseatrails.RefertoRemoving/InstallingtheSeatPanonpage 68torepositiontheseatpan.

1. Removethespreaderbar.RefertoRemoving/InstallingtheSpreaderBaronpage 59.

2. Removethehexscrewandcovedwashersecuringeachcrossbartotheseatframe.

3. Pull/pushthesiderails(Detail“B”)tothedesiredwidthshowninthefollowingtable.

4. Alignthecrossbarmountingholeswiththeseatframemountingholes.

5. Secureeachcrossbartotheseatframewitha

hexscrewandcovedwasher.Torquethe

hexscrewto75in‐lbs±20%.

6. Adjustthespreaderbar.RefertoAdjustingSpreaderBarWidthonpage 60.

7. Installthespreaderbar.RefertoRemoving/InstallingtheSpreaderBaronpage 59.

Junior Seat Width Mounting Holes

SEAT

WIDTH

CROSS BAR MOUNTING HOLES*

(FRONT VIEW)

12-INCH

13-INCH

14-INCH

15-INCH

16-INCH

*NOTE:Onlyleftsiderailshown.Usethesamemountingholeforoppositesiderail.

previous next