Filter
Top Products
SECTION 5—CENTER MOUNT FOOTRESTS
Adjustable ASBA Seat 20 Part No 1143238
Chairs built after 12/01/2008
ƽ WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is
three inches. If the wheelchair is not moving, the front rigging MUST maintain a
minimum of one inch ground clearance - otherwise personal injury and damage may
result.
NOTE:Forthisprocedure,refertoFIGURE 5.3.
1. Removethetwomountingscrewsthatsecurethebuttonheadcleattotheextension
housing.
2. Adjustthefootrestextensiontubetothedesiredheight.
3. Securetheextensiontubetothedesiredheightwiththebuttonheadcleatand
mountingscrews.Securelytighten.
4. RepeatSTEPS1‐3fortheotherextensiontube.
FIGURE 5.3 Adjusting the Height of the Manual Center Mount Footrest -
Chairs built after 12/01/2008
Extension
Housing
Extension Tube
Mounting Screws
Extension Tube Mounting Holes
Button Head Cleat