Support User Manuals

Invacare Adjustable ASBA Seat Car Seat User Manual

Open as PDF

of 76

SECTION 8—ARMS

Part No 1143238 45 Adjustable ASBA Seat

Installing/Removing the Cantilever Arms

NOTE:Forthisprocedure,refertoFIGURE 8.3.

NOTE:Reversethisproceduretoremovethecantileverarm.

1. Inserttheaflangedbearingintoeachsideofthecantileverarmmountingtube.

2. Putthecantileverarmintoplaceonthebackcanemountingbracket.

3. Insertthepivotarmbushingintothecantileverarmmountingtube.

4. Attachthecantileverarmtothebackcanemountingbracketwithasocketheadcap

screw.

5. Adjusttheangleofthecantileverarmtoaccommodatetheuser.Installthesockethead

capscrewthroughtheslotinthecantileverarmmountingbracketandintotheholein

thepivotarmbushing.

Tightenthesocketheadcapscrew.

6. Insertthesocketheadscrewintotheholeinthebackcanemountingbracket.Tighten

thesocketheadscrew.

FIGURE 8.3 Installing/Removing the Cantilever Arms

Flanged Bearings

Cantilever Arm

Pivot Arm Bushing

Socket Head Screw

Socket Head Cap Screw

Cantilever Arm

Mounting Tube

Back Cane Mounting Bracket

Socket Head Screw

previous next