Support User Manuals

Invacare Adjustable ASBA Seat Car Seat User Manual

Open as PDF

of 76

SECTION 11—ADULT SEATS

Part No 1143238 67 Adjustable ASBA Seat

7. Slidebothfrontarmsockets(withT‐nuts)outoftheslotsinthesiderails.

8. Pullbothsiderailsoffthecrossbars.

Installing Side Rails

1. Installnewsiderailsontocrossbars.

NOTE:Ensurelongendofsiderailistowardsthefrontofthewheelchair.

2. Securethesiderailstothecrossbarswiththehexscrews,washerandlanyard.Torque

to75in‐lbs±20%.

3. Slidecanebrackets(withT‐nutsandbackassembly)intothe

slotsinthesiderails.

4. Slidefrontarmsockets(withT‐nuts)intotheslotsinthesiderails.

5. Usearubbermallettotapthetworollpinsintothesiderails.

6. Adjusttheseatdepth.RefertoAdjustingtheSeatDepthonpage 65.

7. Tightenthefourhexscrewstosecurethecanebracketstothesiderails.Torqueto13

ft‐lbs±20%.

8. Installthearmrests.

NOTE:Itmaybenecessarytoslidethefrontarmsocketstotheproperpositiontoinstallthe

armrests.

9. Tightenthefourhexscrewstosecurethefrontarmsocketstothesiderails.Torqueto

13ft‐lbs±20%.

FIGURE 11.4 Removing/Installing Side Rails

Side View

Hex Screws

Washer

Roll

Pin

Crossbar

Side Rail

Hex Screws

Front Arm

Socket

Cane Bracket

Slot

Back

Cane

previous next