Support User Manuals

Invacare Adjustable ASBA Seat Car Seat User Manual

Open as PDF

of 76

SECTION 6—FRONT RIGGINGS

Adjustable ASBA Seat 30 Part No 1143238

Adjusting Adjustable Angle Flip-Up Footplates

Depth Adjustment

NOTE:Forthisprocedure,refertoFIGURE 6.10onpage 29.

1. Removethetwoflatscrews,washersandlocknutsthatsecurefootplatetothehalf

clamp.

NOTE:Observetheangleofthefootplateforreinstallation.

2. Movefootplatetooneoffourmountingpositions.

NOTE:Ifdesireddepthisstillnotobtained,rotatethehalfclamponthefootplatehinge180°.

3. Retightenthetwoflatscrews,washersandlocknuts.

NOTE:Thesettingsforpositioningthefootplatesonthehalf‐clampsmayvaryforeachfootplate.

Angle Adjustment

NOTE:Forthisprocedure,refertoFIGURE 6.10onpage 29andFIGURE 6.11.

1. Loosen,butDONOTremove,thetwo

flatscrews,washerandlocknutsthat

securethefootplatetothefootplate

hinge(FIGURE 6.10).

2. Positionthefootplatetothenecessary

angletoaccommodatetheuser

(FIGURE 6.11).

3. Retightenthetwoflatscrews,washers

andlocknuts.

FIGURE 6.11 Angle Adjustment

Perpendicular and/or Inversion/Eversion Adjustment

NOTE:Forthisprocedure,refertoFIGURE 6.10onpage 29andFIGURE 6.12.

NOTE:Itisnotnecessarytoremovethe

footplatetoperformthisadjustment.

1. Insertaflatheadscrewdriverthrough

thehalfclamponthefootplate

(FIGURE 6.10).

2. Slowlyturnnylonadjustmentscrewin

oroutuntilfootplateisperpendicular

tothefootrestassembly

orthedesired

inversionoreversionisobtained

(FIGURE 6.12).

FIGURE 6.12 Perpendicular and/or

Inversion/Eversion Adjustment

Side View of

Footplate and

Footrest

Support

Footrest Support

Footplate

Front View of Footplate

and Footrest Support

Footrest Support

Footplate

previous next