Filter
Top Products
Intel® Solid-State Drive DC P3700 Series
May 2015 Product Specification
330566-009US 13
Electrical Characteristics
Intel SSD DC P3700 Series
3.3Vaux Operating Characteristics:
Operating Voltage range
Rise Slew Rate (Min/Max)
Fall Slew Rate (Min/Max)
1
Noise level
Max Current
3.3 V (±9%)
66/3300 V/s
0.66/3300 V/s
300 mV pp 10Hz – 100 KHz
50 mV pp 100KHz – 20 MHz
20mA/1mA (AIC/2.5-inch FF)
Notes:
1. Fall time needs to be equal or better than minimum in order to guarantee full functionality of enhanced power
loss management.
2. The drive must be powered off for at least 3 seconds before powering on.
3. Measured during initial power supply application. Typically this will be seen within 2 seconds of initial power up.
Inrush specified for 12V and 3.3V supply, not the 3.3Vaux.
4. 3.3Vaux is optional, not needed for power up or functionality. 3.3Vaux is needed for accessing VPD page by means
of SMBUS for both form factors.
Table 10: Power Consumption
Specification
Unit
Intel SSD DC P3700 Series
400GB
800GB
1.6TB
2TB
Active Write - Average
1
W
12
18
22
25
Active Read - Average
2
W
9
9
10
11
Idle
W
4
4
4
4
Notes:
1. The workload equates 128KB (131,072 bytes) Queue Depth equal to 128 sequential writes. Average power is
measured using scope trigger over a 100 ms sample period.
2. The workload equates 128KB (131,072 bytes) Queue Depth equal to 128 sequential reads.