Filter
Top Products
45
3.2 Include Paths
❍ [Help] button
This button displays a help file.
■ Entry procedure
Set up an include path with the following procedure:
1) In the include path name field, enter an include path. (An include path can also be entered
using the [Browse] button.)
2) If it is correct, add the path to the register list shown below the field, using the [Add] button.
3) To change the position of the include path in the register list, use the [Up] and [Down]
buttons as appropriate.
4) Delete the unnecessary include paths using the [Delete] button, if any.