Filter
Top Products
44
CHAPTER 3 Setting up Check Options
■ Explanation
The dialog box for setting up include paths contains the following:
❍ Include path name field
In this field, enter the include path to be registered.
❍ Include path list
The registered include paths are displayed.
❍ [Browse] button
This button displays the dialog box for browsing include paths.
From this dialog box, an include path can be selected and entered in the include path
entry field.
❍ [Add] button
This button adds the include path entered in the include path entry field to the include path
register list.
❍ [Delete] button
This button deletes an include path from the include path register list.
To delete an include path, click the include path in the register list with the left mouse
button and click this button.
❍ [Up] button
This button moves an include path registered in the include path register list in the upward
direction.
The C Checker searches for the files to be included through the registered include paths,
starting from the uppermost path.
❍ [Down] button
This button moves an include path registered in the include path register list in the
downward direction.
❍ [Standard] button
Recovers all the settings to default value.
❍ [Open] button
Reads the settings of the options from an information file.
❍ [Save] button
Saves all the settings into a file.
If the settings of any check options have been changed, a confirmation dialog box
appears asking whether the changes should be saved before the options are saved into
the information file.
To cancel the changes, click the [Yes] button in the dialog box.
To save the changes, click the [No] button in the dialog box. Then, click the [Apply] button
and click the [Save] button again.