Filter
Top Products
2.2 Selection of a Source File
25
2.2 Selection of a Source File
To check a source program using the C Checker, select the source program file to be
checked.
• [Open] command from the [Files] menu
• [New] command from the [Project] menu
• [Open] command from the [Project] menu
Execute one in the above-mentioned command.
■ [Open File]
Choose the [Open] command from the [Files] menu, and the [Open] dialog box, shown in Figure
2.2-a, appears. Select a file with the “.c” file identifier, and the file is opened on the built-in editor.
(See Figure 2.2-b.)
Figure 2.2-a [Open] dialog box