Filter
Top Products
7
• To recharge or change the battery, unlock the vehicle
seat:
- If your vehicle seat is equipped with a lock fastener, use
a slotted screwdriver to rotate the lock fastener
1
/4 turn
to the unlocked position ( ).
- If your vehicle seat requires use of the #10 x
1
/2" bolt,
loosen the bolt using a Phillips screwdriver. Remove the
bolt and set it aside for re-assembly of the seat.
• Push in firmly on the back of the seat to release the tabs
on the seat from the slots in the vehicle body.
• Lift the seat to remove it from the vehicle body.
Tab
Tab
Push
Here
6b
• Lock the seat to prevent children from accessing
the battery.
- If your vehicle seat is equipped with a lock fastener
(illustration 6a), use a slotted screwdriver to rotate the
lock fastener
1
/4 turn to the locked position ( ).
- If your vehicle seat requires use of the #10 x
1
/2" bolt
(illustration 6b), insert the bolt into the seat and tighten
it with a Phillips screwdriver. Do not over-tighten.
Seat
Lock
Fastener
Lock Fastener
Opening
Seat
Bolt
Hole
Hole
6a
LOCKED
Lock Fastener
18
Battery Installation