Filter
Top Products
13
Assembly
19
• Insert the wire connector on the main wire harness
through the large opening in the center of the vehicle
body.
• Plug the main wire harness connector and the handlebar
wire harness connector together.
20
• Position the vehicle body upright.
• Fit the bottom tabs on the grille into the slots in the front
of the vehicle body .
• Press firmly to snap the bottom tabs into the slots.
• Press firmly near the top of the grille to snap the top tabs
into the slots .
Please Note: You may need to flex the grille slightly to
fit it under the handlebar assembly. The grille may
have an additional tab. Press firmly in the middle of
the grille to snap the tab into the vehicle body.
2
1
Steering Column
Square
Bushing
Cap Nut
Handlebar
Hole
Handlebar
Wire
Harness
17
• Position the vehicle body upright.
• While fitting the handlebar onto the end of the steering
column, insert the end of the handlebar wire harness
through the hole in the front of the vehicle body.
• Fit a cap nut onto the end of the steering column.
Helpful Hint: You may need the help of another person to
support the curved end of the steering column near the
steering linkage to fit and secure the cap nut on the
straight end of the steering column.
• Tap the cap nut with a hammer to secure it on the end of
the steering column.
18
• Turn the vehicle body on its side.
• Fit a cap nut on the end of the steering column.
• Tap the cap nut with a hammer to secure it on the end
of the steering column.
Cap Nut
End of Steering
Column
Main Wire
Harness
Connector
Opening
Handlebar Wire
Harness
Connector
Grille
Bottom
Tabs
Top Tabs
Slots
1
2