Filter
Top Products
Steering
Column
Steering
Linkage
Hole
Guides
Steering
Column
Vehicle
Body
Square
Opening
Steering
Column
Square Bushing
13
• Turn the handlebar assembly upside down.
• Align the handlebar wire harness with the guides on the
underside of the handlebar and the guide at the bottom
of the headlight.
• Push firmly on the handlebar wire harness near each of
the guides to secure the wire in the underside of the
handlebar assembly.
• Set the handlebar assembly aside.
14
• Wipe the steering column with a paper towel to remove
any dirt or oils.
• Slide a square bushing onto the straight end of the steer-
ing column.
12
Assembly
• Insert the curved end of the steering column through the
square opening in the vehicle body.
• Rotate the square bushing
1
/
4
turn to slide it over the
tabs on the steering column and into the square opening
in the vehicle body.
• Turn the vehicle body on its side.
• Insert the curved end of the steering column into the
hole in the steering linkage. Make sure the steering
column is positioned between the guides on the
underside of the vehicle body.
15
16
Handlebar
Wire Harness
Handlebar
Headlight
Guides