Filter
Top Products
Slot
Handlebar
Console
Pegs
Handlebar
Rectangular
Tab
Headlight
Wheel Bushing
Wheel
Bushing
Front Axle
Washer
Front
Wheel
Vehicle Body
10
5
6
• Fit a wheel bushing into the rectangular opening in each
front wheel.
• Fit a washer onto one of the front axles.
• Slide a front wheel, bushing side first, onto the front axle.
Cap
Nut
Round
Bushing
• Slide a round bushing onto the front axle and press it
into the center of the front wheel.
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer to secure it on the front
axle.
• Repeat assembly steps 6 and 7 to assemble the other
front wheel to the other front axle.
• Position the vehicle body upright.
7
• Fit the rectangular tab on the back of the headlight into
the slot at the back of the handlebar console. Make sure
the pegs in the top corners of the headlight fit into
the handlebar console.
8
Assembly