Filter
Top Products
Configuring Digital Piano Settings
EN-77
English
Pedal Edit This is a group of editable parameters for the pedal connected to the ASSIGNABLE
PEDAL terminal. Details of the editable parameters are the same as “Knob1 Edit”,
above.
Pedal Type Specifies whether the pedal connected to the ASSIGNABLE PEDAL jack is to be
used as a foot switch or an expression pedal. Do not change this setting while the
pedal is depressed.
Foot Switch,
Exp. Pedal
Pedal Mode Selects the operation performed when the pedal is pressed.
Momentary: On while the pedal is depressed, off while the pedal is released.
Toggle: On after the pedal is pressed and remains on even if the pedal is released.
Off when the pedal is pressed again.
Momentary,
Toggle
Upper1 Pedal Turning on this setting applies the effect to the main tone when the pedal connected
to the DAMPER PEDAL terminal or pedal connector is depressed.
Off, On
Upper2 Pedal Turning on this setting applies the effect to the layer tone when the pedal connected
to the DAMPER PEDAL terminal is depressed.
Off, On
Lower1 Pedal Turning on this setting applies the effect to the split (main) tone when the pedal
connected to the DAMPER PEDAL terminal is depressed.
Off, On
Lower2 Pedal Turning on this setting applies the effect to the split (layer) tone when the pedal
connected to the DAMPER PEDAL terminal is depressed.
Off, On
Bend Range Specifies (in semitone units) how much the pitch of the keyboard performance parts
(Port A parts 1 through 5) changes when the pitch bend wheel is rotated all the way
upwards or downwards.
00 to 24
Item Description Setting
PX560-ES-1A.indd 79 2015/06/18 14:53:54