Filter
Top Products
Recording and Playback
EN-65
English
1.
On the MENU screen, touch “MIDI
RECORDER”.
2.
Touch “Monitor”.
3.
Touch “Edit”.
4.
Touch “Key Shift”.
5.
Touch the track you want to key shift.
6.
Touch the item whose setting you want to
change, and then use the bt w, q buttons
to change it.
Shift: Specifies the extent of the key shift. You can
specify a value in the range of –24 to +24.
Measure: Specifies the measure number from which
key shift starts.
Size: Specifies the number of measures to be key
shifted.
7.
After you are finished configuring settings,
touch “Execute”.
8.
Touch “Yes”.
• To cancel the key shift operation, touch “No”.
• If a Point A and Point B are specified using the
procedure under “To repeat playback of a specific
section (Repeat)” (page EN-61) before performing
this operation “Measure” and “Size” settings will be
configured automatically.
Anything played on the Digital Piano is recorded to the
USB flash drive as audio data (WAV files*). If you play
along on the Digital Piano as you play back data stored
in Digital Piano memory, the memory playback and
your keyboard play are both recorded to USB flash
drive.
* Linear PCM, 16bit, 44.1 kHz, Stereo
• Each new recording of audio data to a USB flash
drive is automatically assigned a new file name, so
existing data is not overwritten.
• Never remove the USB flash drive while Audio
Recorder recording or playback is in progress. Doing
so can corrupt the data on the USB flash drive and
damage the USB flash drive port.
PREPARATION
• Be sure to format the USB flash drive on the Digital
Piano before using it. See “USB Flash Drive” on page
EN-82 for more information.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
• When you perform a USB flash drive operation or
turn on the Digital Piano while a USB flash drive is
plugged in, the Digital Piano initially needs to
perform a “mounting” sequence to prepare for data
exchange with the USB flash drive. Digital Piano
operations may be momentarily disabled while a
mounting sequence is being performed. While the
mounting process is in progress, the message “Media
Mounting” will be displayed on the display. It may
take up to 10 or 20 seconds or even longer for a USB
flash drive to be mounted. Do not attempt to perform
any operation on the Digital Piano while a mounting
sequence is in progress. A USB flash drive needs to be
mounted each time it is connected to the Digital
Piano.
2.
On the MENU screen, touch “AUDIO
RECORDER”.
To key shift a specific measure from a
specific track
Recording to a USB Flash
Drive (Audio Recorder)
To record keyboard play to a USB flash
drive
PX560-ES-1A.indd 67 2015/06/18 14:53:52