Casio PX-560 Musical Toy Instrument User Manual


 
Editing a Tone
EN-25
English
Editable Parameters
Shaded cells indicate a group made up of multiple setting items. Touching “Enter” displays the setting items of a
group.
Editable Melody Tone Parameters
Display Text Description Settings
Pitch Pitch envelope. The editable parameters in this group affect the pitch of
notes.
Octave Shift Octave shift. Changes the tone of notes in octave units. –2 to 0 to +2
Envelope The figure below also applied to filter, amp, and other envelopes. With
the pitch envelope, the pitch of the sound corresponds to the vertical
(Level) axis.
With a hex layer tone envelope, Decay Time can be divided into three
parts and Release Time can be divided into two parts and edited.
When Decay Level 3 is reached during key release note on, an
immediate transition is made to Release Level 1 without sustain.
The setting ranges of the parameters below are relative changes
(relative to the presets of the tone) in the case of melody tones and
drum tones. When editing a hex layer tone, they are absolute changes
that have no relation to the presets of the tone.
Time and level of each envelope
Rate, depth, delay, rise, modulation depth of LFO (page EN-27)
Initial Level Initial level. Pitch of the sound at initial note on. –64 to 0 to +63
Attack Time Attack time. Time it takes until the attack level is reached from the initial
level.
–64 to 0 to +63
Release Time Release time. Time it takes to reach Release Level after a key is released. –64 to 0 to +63
Release Level Release level. Target level reached immediately after a key is released. –64 to 0 to +63
Stretch Tune Stretch tuning. Sharpens high notes and flattens low notes to achieve
characteristic piano stretch tuning. Turn off this setting to play with
normal (non-stretch) tuning.
Off, Piano1, Piano2,
Piano3, Piano4, Piano5,
E.Piano1, E.Piano2
IL
AL
DL1
DL2 DL3
RL1
RL2
AT DT1 DT3DT2 RT1 RT2
Level
Time
DT RT
DL
RL
IL : Initial Level RT: Release Time
AT: Attack Time (RT1: Release Time 1)
AL
DT
: Attack Level (RT2: Release Time 2)
: Decay Time RL : Release Level
(DT1: Decay Time 1) (RL1: Release Level 1)
(DT2: Decay Time 2) (RL2: Release Level 2)
(DT3: Decay Time 3)
DL: Decay Level
(DL1: Decay Level 1)
(DL2: Decay Level 2)
(DL3: Decay Level 3)
PX560-ES-1A.indd 27 2015/06/18 14:53:45