Filter
Top Products
Configuring Digital Piano Settings
EN-75
English
Auto Resume When “On” is selected for this setting, the Digital Piano will
remember its settings whenever it is turned off, and restore them
when it is turned on again.
When “Off” is selected, settings are reset to their initial defaults
whenever the Digital Piano is turned on.
Off, On
Auto Power Off Specifies if Auto Power Off (page EN-8) is enabled (On) or disabled
(Off).
Off, On
Exp.pedal Calibration Performs an expression pedal calibration operation.
1. When the message “Move the expression pedal to the highest
position and Press "OK"” appears, press the pedal and then touch
“OK”.
2. When the message “Move the expression pedal to the lowest
position and Press "OK"” appears, release the pedal and then
touch “OK”.
The message “Complete” will appear on the display when the
operation is complete.
• Touch br EXIT to exit the calibration operation.
–
Factory Reset Use this screen to return the piano’s stored data and settings to their
initial factory defaults.
–
Information Shows the version of the firmware installed on the Digital Piano.
Also use this item when updating the Digital Piano firmware.
–
Item Description Setting
PX560-ES-1A.indd 77 2015/06/18 14:53:54