xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 7- 27. Authentication RADIUS Server Settings window
This window displays the following information:
Parameter Description
Index
Choose the desired RADIUS server to configure: First, Second or Third.
IPv4 Address
Click the radio button and enter the RADIUS server IPv4 address.
IPv6 Address
Click the radio button and enter the RADIUS server IPv6 address.
Authentication
UDP Port (1-
65535)
Enter the RADIUS authentic server(s) UDP port. The default port is 1812. Alternatively, users
can tick the Default check box.
Accounting UDP
Port (1-65535)
Enter the RADIUS account server(s) UDP port. The default port is 1813. Alternatively, users can
tick the Default check box.
Key
Enter the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Timeout (1-255)
Enter a timeout value between 1 and 255 seconds. The default value is 5 seconds. Alternatively,
users can tick the Default check box.
Retransmit (1-20)
Enter a retransmit value between 1 and 20. The default value is 2. Alternatively, users can tick
the Default check box.
Status
This allows users to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
366
