xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
The following parameters may be set or viewed:
Parameter Description
Dst. Protocol
Allows for the selection of the protocol for the destination device. Choose among RIP, OSPF,
and BGP.
Src. Protocol
Allows for the selection of the protocol for the source device. Choose between RIP, OSPF,
BGP, Static and Local.
Action
Toggle the drop-down menu to Add or Edit the router redistribution setting being configured.
Type
Allows for the selection of one of six methods of calculating the metric value. The user may
choose between All, Internal, External, ExtType1, ExtType2, Inter-E1, Inter-E2.
Metric (0-16)
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP
routing protocol. The user may specify a cost between 0 and 16.
Route Map
Use the pull-down menu to add or delete a route map. Specify a route map, which will be
used as the criteria to determine whether to redistribute specific routes.
Route Map Name
Enter the route map name to add or delete.
Click Apply to implement changes made. To remove an entry from the table, click its corresponding under the Delete heading.
NOTE: The source protocol (Src. Protocol) entry and the destination
protocol (Dst. Protocol) entry cannot be the same.
180
