PRESET WEIGHT COMPARATORS SETUP, CONT.
2. BAL PRNT
hed).
Note that the weight
(AUTOMATIC PRINT ON BALANCE)
With the Preset Weight Comparator Menu displayed the current setting for the
BAL PRNT= parameter will be shown. Note that XXX is the current value.
If the Automatic Print on Balance is enabled, when the weight equals the preset value
and all motion on the scale stops, the weight will be printed (if a printer is attac
UmustU go below 50% of the preset value befor
performed.
e another print
operation can be
If the s ble, proceed to the next setup parameter. Otherwise,
press the 1 key, the ENTER key, YES or NO (on the soft keys) and then the ENTER
key to save the new setting and return to the ID Storage Menu.
BAL NT=NO
Automatic Print Enabled Automatic Print Disabled
Prese
1. W
A
2. W
to
3. P 2.
4. Press EXIT (Navigation Keys
5. Press EXIT nd return to normal
operations.
etting displayed is accepta
PRNT=YES BAL PR
t Weight Comparators Setup Completed
ith the Preset Weight Comparator Menu displayed, press EXIT (Navigation Keys UP
rrow) to return to the Mode Of Operation Menu.
ith the Mode Of Operation Menu displayed, press EXIT (Navigation Keys UP Arrow)
return to the SETUP MENU #1.
ress NEXT (Navigation Keys Down Arrow) to proceed to the SETUP MENU #
UP Arrow) to return to the SETUP/REVIEW MENU.
(Navigation Keys UP Arrow) to reset the indicator a
8200-M538-O1 y 225 Installation
Page 79
