CALIBRATION AND SETUP, CONT.
10. MODE OF OP=X XXXX (MODE OF OPERATION)
.
the setting displayed is acceptable, press NEXT (Navigation Keys Down Arrow) to
he
Othe 0 keys and then th he display will change to
show th u.
= NORM)
) to
MENU #2.
to
n of this manual.
2. Dig
Press u.
Refer t
the 225 Installation and Technical CD-ROM.
ight Comp = PWC)
3
(Check Weigher = )
r
25
.
Menu. Refer to the
MODE OF OPERATI
Te
6. Pack
Press t
Refer to
the 225
With SETUP MENU #1 displayed the current setting for the MODE OF OP= parameter will
be shown. Note that X is the current value and XXXX is the mode of operation abbreviation
If
proceed to SETUP MENU #2 or press EXIT (Navigation Keys UP Arrow) to return to t
SETUP/REVIEW MENU.
rwise, press the 1 and e ENTER key. T
e Mode Of Operation Men
0. Normal Indicator (Normal Indicator
Press the 0 key, the ENTER key and then press EXIT (Navigation Keys UP Arrow) to
exit and return to SETUP MENU #1. Press NEXT (Navigation Keys Down Arrow
proceed to the next display, SETUP
1. ID Storage (ID Storage = IDS)
Press the 1 key and then the ENTER key to proceed to the ID Storage Menu. Refer
the ID STORAGE SETUP, Mode Of Operation = 1 (ID Storage) sectio
ital Fill Ctrl (Digital Fill Control = DFC)
the 2 key and then the ENTER key to proceed to the Digital Fill Control Men
o the MODE OF OPERATION = 2 (Digital Fill Control) section of the manual on
3. Preset Weight Comp (Preset We
Press the 3 key and then the ENTER key to proceed to the Preset Weight Comparator
Menu. Refer to the PRESET WEIGHT COMPARATORS SETUP, Mode Of Operation =
(Preset Weight Comp) section of this manual.
4. Check Weigher CHW
Press the 4 key and then the ENTER key to proceed to the Check Weigher Menu. Refe
to the MODE OF OPERATION = 4 (Check Weigher) section of the manual on the 2
Installation and Technical CD-ROM
5. Batcher (Batcher = BATR)
Press the 5 key and then the ENTER key to proceed to the Batcher
ON = 5 (Batcher) secti
c
on of the manual on the 225 Installation and
hnical CD-ROM.
age Weigher (Package Weigher = PKW)
he 6 key and then the ENTER key to proceed to the Package Weigher Menu.
the MODE OF OPERATION = 6 (Package Weigher) section of the manual on
Installation and Technical CD-ROM.
8200-M538-O1 y 225 Installation
Page 39
