CALIBRATION AND SETUP, CONT.
4. FINE SPAN (FINE SPAN ADJUSTMENT)
If Fine Span Adjustment UisU desired, place a calibrated test weight on the scale and wit
SCALE 1 CALIBRATION ME
h the
NU displayed, press the 4 key and then the ENTER key. The
display will change to show SCALE 1 FINE SPAN ADJUST. Note that ADJ = XXXXXXX
is the current displayed weight.
SCALE 1 FINE SPAN ADJUST
^ UP ` DOWN < EXIT
ADJ = XXXXX
Arrow) to increase the span.
Press DOWN (Navigation Keys Down Arrow) to decrease the span.
y Press EXIT (Navigatio ting and return to the
SCALE
5. HI RES
If High Re rated test weight on the scale
and with th 5 key and then the
ENTER ke HIRES ADJUSTMENT. Note that
HIRES=XXXXXX is the active weight in “high resolution” mode (in 1/10 interval).
y Press UP (Navigation Keys UP
y
n Keys Left Arrow) to save the new set
1 CALIBRATION MENU.
(HIGH RESOLUTION ADJUSTMENT)
solution Weight adjustment is desired, place a calib
e SCALE 1 CALIBRATION MENU displayed, press the
y. The display will change to show SCALE 1
SCALE 1 HIRES ADJUSTMENT
^ UP ` DOWN < EXIT
ZERO :zero scale PRINT : print weight
HIRES=XXXXXX
vigation Keys UP Arrow) to increase the span.
crease the span.
avigation Keys Left Arrow) to save the new setting and return to the
SCALE 1 CALIBRATION MENU.
y Press UP (Na
y Press DOWN (Navigation Keys Down Arrow) to de
y Press EXIT (N
y Press the ZERO key to zero the scale.
y Press the PRINT key to print the weight (followed by the text TEST).
8200-M538-O1 y 225 Installation
Page 63
