Filter
Top Products
29
reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
CP
u-2. [DEPTH] knob
For adjusting the degree to which the chorus
or phaser effect is applied. Turn the knob
clockwise to increase the depth of the effect.
u-3. [SPEED] knob
For adjusting the speed at which the sound
undulates. Turn the knob clockwise to
increase the speed.
iD. DELAY/A. DELAY (Digital Delay /
Analog Delay)
This section lets you add either digital or ana-
log delay to the sound.
Delay effects create a delayed version of the
input signal, and as such, they can be used for
many different purposes, such as creating a
sense of spaciousness or thickening a sound.
D. DELAY (Digital Delay)
Compared with analog delay, this effect pro-
duces delay sounds that are more exact repli-
cas of the original.
A.DELAY (Analog Delay)
Simulates the warm delay sound of analog
gear.
i-1. [D.DELAY/A.DELAY] switch
Set this three-position switch to the up posi-
tion for Digital Delay, to the down position
for Analog Delay, or to the middle position to
pass the sound through unaffected.
The lamp (i-4) will light up when either
digital or analog delay is selected and go out
when the sound passes through unaffected.
i-2. [DEPTH] knob
For adjusting the degree to which delay is
applied. Turn the knob clockwise to increase
the depth of the effect.
i-3. [TIME] knob
For adjusting the length of the delay. Turn the
knob clockwise to increase the length.
oREVERB section
This section can model complex reverbera-
tion to artificially create a sense of space.
The lamp (o-2) will light up when reverb is
applied and go out when the sound passes
through unaffected.
o-1. [DEPTH] knob
For adjusting the degree to which the reverb
effect is applied. Turn the knob clockwise to
increase the depth of the effect. When the
knob is turned all the way counter-clockwise,
no effect is applied to the sound.