Filter
Top Products
6
reface CS/DX/CP/YC Owner’s Manual
Turning On and Off
This instrument can be powered by either an AC adaptor or batteries.
Using with the AC Adap-
tor
qEnsure that the [ ] (Standby/On) switch is
set to the standby condition ( ).
wInsert the AC adaptor’s DC plug into the
instrument’s DC IN jack.
ePlug the AC adaptor into a domestic-use, AC
wall socket.
NOTE
• When disconnecting the AC adaptor, turn off
the instrument and then carry out this proce-
dure in reverse order.
• If the AC adaptor is connected, it will be used
to power the instrument regardless of
whether or not it contains batteries.
• Do not insert or remove the DC plug with the
[ ] (Standby/On) switch set to the On posi-
tion ( ). Failure to observe this precaution
can lead to malfunction.
q [ ] (Standby/On) switch
DC plug
w DC IN jack
Domestic-use,
AC wall socket
e AC adaptor
WARNING
• Be sure to use only the correct AC adap-
tor (page 48). The use of other adaptors
may damage the instrument, cause it to
overheat, or create a fire hazard. In such a
case, the product warranty will immedi-
ately become void, even if the warranty
period has not yet expired.
• Ensure that the included AC adaptor is
plugged into a wall socket at the correct
voltage.
• If your AC adaptor has a detachable plug,
ensure that it is always used and stored
with the plug attached. Inserting only the
plug section into a wall socket can lead to
electric shock or create a fire hazard.
• If the plug detaches from your AC adap-
tor, slide it back in until it clicks into
place, taking care to avoid touching any
internal metal parts. Please also ensure
that no foreign objects enter the AC adap-
tor. Failure to observe this precaution can
lead to electric shock, short circuits, or
malfunction.
CAUTION
If you notice anything unusual when using
this instrument in close proximity to a wall
socket, immediately turn it off and remove
the plug from the wall socket.
Plug
Insert by sliding in the
direction of the arrow