Filter
Top Products
VIKING TECHNICAL SUPPORT 1.800.908.0884
34
ACCESSORY CONNECTIONS
( + )
( + )
( + )
( + )
Magnetic Lock
Lock Solenoid
Magnetic Lock, Lock Solenoid
NOTE:
Viking Access Systems does not provide external gate lock devices. These items
can be purchased from your dealer or distributor.
Power for the Locks:
Do not use the 24VDC power supplied
by the control board. An external power
supply, or plug-in transformer, must
be used for the magnetic lock or lock
solenoid. Plug the transformer into the
“120VAC” receptacle provided at the
operators Power Box. This will prevent
rapid drainage of the battery in the event
of power failure.
The control boards “Magnetic Lock” relay
is rated for 10A-250VAC.
! TECHNICAL TIP: The Magnetic Lock Relay
LED will indicate status of the on-board
relay even if a lock is not connected to
the control board. Refer to page 36.