Filter
Top Products
5
Insignia 65" 1080p LED TV
www.insigniaproducts.com
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the stand column to the TV using five
M6 x 18 mm screws (provided).
3 Secure the TV stand base to the stand column
using seven M6 x 18 mm screws (provided).
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the five screws that secure the stand
column to the TV, then remove the stand
column.
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M6 18 mm 5
Screw type Screw length # of screws
M6 18 mm 7
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous
” on page 53.)
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.
15.75 in. (400 mm)
15.75 in. (400 mm)
Wall-mount brackets