Filter
Top Products
14
NS-65D260A13 Insignia 65" 1080p LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI1(DVI) jack on the back of your TV.
4 Connect a 3.5mm audio cable (not provided) to
the PC IN AUDIO jack on the back of your TV
and to the AUDIO OUT jacks on the DVD or
Blu-ray player.
5 Plug your TV’s power cord into a power outlet,
then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or
T
to select HDMI1, then press
ENTER.
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the Y/VIDEO, P
B
, and P
R
jacks on
the back of your TV and to the COMPONENT
OUT jacks on the component video device.
3 Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the back of your TV
and to the L/R AUDIO OUT jacks on the DVD or
Blu-ray player.
4 Plug your TV’s power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to select Component, then press
ENTER.
Note
You must use the HDMI 1 (DVI) jack to connect a
DVD or Blu-ray player using DVI. If you use another
HDMI jack, you will not hear sound from the TV
speakers.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
DVD or Blu-ray player
HDMI cable with
HDMI-DVI adapter
3.5mm audio cable
Back of TV
Notes
•The Y/VIDEO, P
B
, and P
R
video jacks (used to
connect a component device) share the
AV IN AUDIO L/R jacks with the Y/VIDEO jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
Component video cable
Audio cable
Cables are often color-coded to match color-coded jacks.
DVD or Blu-ray player
Back of TV