Filter
Top Products
50
C. Preparing the Icemaker for Long Storage
WARNING
When shutting off the icemaker for an extended time, drain out all water from
the water line and remove the ice from the storage bin. The storage bin should
be cleaned and dried. Drain the icemaker to prevent damage to the water
supply line at sub-freezing temperatures, using air or carbon dioxide. Shut off
the icemaker until the proper ambient temperature is resumed.
1) Run the icemaker with the water supply line shut-off valve closed.
2) Open the drain valve and blow out the water inlet line by using air pressure.
3) Unplug the unit from the electrical outlet.
4) Remove the front panel.
5) Move the ush switch on the control box to the “FLUSH” position.
6) Plug the unit back in, drain all water from the water line.
7) Unplug the unit from the electrical outlet.
8) Turn off the power switch on the control box.
9) Replace the front panel in its correct position.
10) Close the drain valve.
11) Remove all ice from the storage bin, and
clean the bin.
Fig. 6