Filter
Top Products
Setup
313539F 21
12. Ground system
a. Reactor: is grounded through power cord. See
page 18.
b. Spray gun: connect whip hose ground wire to
FTS, page 19. Do not disconnect wire or spray
without whip hose.
c. Fluid supply containers: follow your local code.
d. Object being sprayed: follow your local code.
e. Solvent pails used when flushing: follow your
local code. Use only metal pails, which are con-
ductive, placed on a grounded surface. Do not
place pail on a nonconductive surface, such as
paper or cardboard, which interrupts grounding
continuity
f. To maintain grounding continuity when flushing
or relieving pressure, hold a metal part of spray
gun firmly to the side of a grounded metal pail,
then trigger gun.
13. Check hydraulic fluid level
a. Hydraulic reservoir is filled at the factory. Check
fluid level before operating the first time, and
weekly thereafter. See Maintenance, page 36.